Icom 756 Pro 3 Pro iii HF/6m SSB CW DSP ATU 100 watt 2 ant port work looks great

Description

Icom 756 Pro 3 HF/6m SSB CW AM RTTY 32 Bit IF Digital Signal Processor
No Mods
Auto Tuner.8 different screen backgrounds Very Clean Radio 100watts output 160-6m
comes with owners and service manuals.power cord and vinyl cover.2 antenna ports
Screen Saver and Dual Clocks
Ships with tracking number no po box.
Type:
Amateur HF/VHF transceiver
Frequency range:
TX: 10-160 m + WARC / 50-54 MHz
RX: 0.03-60 MHz
Tuning steps:
1 Hz, 0.1 / 1 / 5 / 9 / 10 / 12.5 / 20 / 25 KHz
Frequency stability:
Better than ±0.5 ppm (-10 to +50°C / +14 to +122°F)
Mode:
AM / FM / SSB / CW / RTTY
Channels/memory management:
99 regular
2 scan edge
Non-volatile EEPROM storage
Repeater shift/offset:
±0 to 4 MHz in 1 KHz steps
Power supply:
13.8 VDC ±15%
Current drain/power consumption:
RX: Max 3.5 A
TX: Max 23 A
Antenna impedance/connector:
50 ohm / 2*SO-239
Dimensions (W*H*D):
340*111*285 mm (13.4*4.37*11.22")
Weight:
9.6 Kg (21.16 lb)
Other features:
32 bit IF-DSP. Built-in RTTY demodulator and auto-ATU.
IP3 = +30 dBm. Built-in keyer. 5" color TFT.
RECEIVER SECTION
Receiver system:
Triple-conversion superheterodyne
1st IF: 64.455 MHz
2nd IF: 455 KHz
3rd IF: 36 KHz
Sensitivity:
AM (10 dB S/N, 6 KHz BW)
0.5-1.8 MHz: 13 uV
1.8-30 MHz: 2 uV (Pre-amp 1 on)
50-54 MHz: 1 uV
FM (12 dB SINAD, 15 KHz BW)
28-30 MHz: 0.5 uV (Pre-amp 1 on)
50-54 MHz: 0.32 uV (Pre-amp 2 on)
SSB/CW/RTTY (10 dB S/N, 2.4 KHz BW)
1.8-30 MHz: 0.16 uV (Pre-amp 1 on)
50-54 MHz: 0.13 uV (Pre-amp 2 on)
Selectivity:
AM (BW=6 KHz)
>6 KHz (-6 dB), <15 KHz (-60 dB)
FM (BW=15 KHz)
>12 KHz (-6 dB), <20 KHz (-60 dB)
SSB/RTTY (BW=2.4 KHz)
>2.4 KHz (-6 dB), <3.6 KHz (-60 dB)
CW (BW=500 Hz)
>500 Hz (-6 dB), <700 Hz (-60 dB)
Image rejection:
>70 dB
AF output power/speaker:
2 W at 10% distortion / 8 ohm
External speaker connector:
3.5 mm, 8 ohm
TRANSMITTER SECTION
RF output power:
AM: 5-40/5-40 W
FM: 5-100/5-100 W (100% duty cycle)
SSB: 5-100/5-100 W (100% duty cycle)
CW: 5-100/5-100 W (100% duty cycle)
RTTY: 5-100/5-100 W (100% duty cycle)
Modulation system:
AM: Low power modulation
FM: Phase modulation
SSB: PSN modulation
FM deviation:
±? KHz
Spurious emissions:
HF: Less than -50 dB
VHF: Less than -60 dB
Microphone impedance/connector:
600 ohm / 8-pin (Metal locking ring connector)
Microphone input level:
? mV